DIMPLEX UNVENTED CYLINDERS
Product Range
Product Information
Whether you require a standard hot water or one which uses renewable energy, Dimplex has the solution.
Dimplex Unvented Cylinders carry capacities from 80 to 4000 litres for plentiful hot water and are ideal for installation in tandem with electrical heating or wet based systems.
Dimplex Unvented Cylinders carry capacities from 80 to 4000 litres for plentiful hot water and are ideal for installation in tandem with electrical heating or wet based systems.
Electric water heating uses an electric element in direct contact with water to heat either a cylinder of water (storage) or water as it is used (instantaneous).
Storage
water stores of between 7litres and 305litres can be used to provide hot water at the turn of a tap. Small under sink units of 7-15litres provide small properties or commercial premises with a regular flow of small amounts of water for either kitchen sinks or hand wash basins with little installation requirements other than that of a cold water and electricity supply. Water is stored in highly insulated cases and is re-heated as it is used. Locating the units close to the point of use reduces the pipework and energy losses from piping hot water long distances. Larger units are able to supply hot water to multiple outlets or to commercial sinks where water demand may be very high. Unvented units provide high flow rates with no additional stored water required in the premises.
Instantaneous
By heating the water only as it is used energy usage is kept to a minimum. Instantaneous water heaters only turn on when they detect a demand for water, so can remain unused for long periods without using any energy. This is particularly useful in premises where space is a premium and water storage would be difficult to locate and also where water usage is irregular. Another benefit is the relatively low installation costs, because the units use the cold mains water supply, reducing hot water pipe runs. Flow rates can range from a minimal amount for handwashing from the units such as the Handyman, providing one of the cheapest means of supplying a handwash facility, to the 13.2litres/min of the 3-phase 24kw units.
Electric storage
Electric water heating is a clean low-noise and simple water heating solution. With elements in direct contact with the water all heat input is transferred to the water, with no loss from pipework to and from a boiler.
Storage
water stores of between 7litres and 305litres can be used to provide hot water at the turn of a tap. Small under sink units of 7-15litres provide small properties or commercial premises with a regular flow of small amounts of water for either kitchen sinks or hand wash basins with little installation requirements other than that of a cold water and electricity supply. Water is stored in highly insulated cases and is re-heated as it is used. Locating the units close to the point of use reduces the pipework and energy losses from piping hot water long distances. Larger units are able to supply hot water to multiple outlets or to commercial sinks where water demand may be very high. Unvented units provide high flow rates with no additional stored water required in the premises.
Instantaneous
By heating the water only as it is used energy usage is kept to a minimum. Instantaneous water heaters only turn on when they detect a demand for water, so can remain unused for long periods without using any energy. This is particularly useful in premises where space is a premium and water storage would be difficult to locate and also where water usage is irregular. Another benefit is the relatively low installation costs, because the units use the cold mains water supply, reducing hot water pipe runs. Flow rates can range from a minimal amount for handwashing from the units such as the Handyman, providing one of the cheapest means of supplying a handwash facility, to the 13.2litres/min of the 3-phase 24kw units.
Electric storage
Electric water heating is a clean low-noise and simple water heating solution. With elements in direct contact with the water all heat input is transferred to the water, with no loss from pipework to and from a boiler.
Instantaneous
Instantaneous electric heaters heat water as it is used removing the energy required to heat a store of water that may not be entirely used.
Find a retailer/stockist
Sales Enquires
Northern Ireland
028 3833 7317
Republic of Ireland
01 842 4277